• Free Shipping $500+

  • Same-Day Shipping Available

  • No Minimum Order

Where Does Your Body Jewelry Actually Come From?

Where Does Your Body Jewelry Actually Come From?

Vanessa |

Where Does Your Body Jewelry Actually Come From?

Whether you go to a piercer to get pierced, or a store to pick out a new piece of body jewelry, you’ll want to know where your jewelry comes from—after all, you’re going to put that jewelry in your body! The short answer is that it did not just wind up on the shelf magically. Every part of your jewelry has origins. In general, the jewelry comes to be in the following process:

Raw material → manufacturing → finishing → quality control → sterilization/packaging (where applicable) → distribution → piercing studio/retail shop → client

In short, body jewelry typically passes through several stages before it reaches the person wearing it: material selection, manufacturing, finishing, quality control, distribution, and—when appropriate—sterilization before use in a fresh piercing.

Let’s get into the details:

Raw Material Selection

Your piece of jewelry was once a collection of components. Someone along the way—either the manufacturer or the supplier—made a choice as to what kind of material it would be made from: steel (see Metal Mafia steel certs here), titanium (see Metal Mafia titanium certificates here), glass, etc. A good supplier will make their metal certificates available to everyone and not require you to ask for them. Metal Mafia's certificates can always be found here: https://metalmafia.com/metal-certificates Once they picked the material, they chose whether it would have gems or other decorative elements. 

They may have chosen glass gems, which catch the light and sparkle, giving your jewelry a beautiful feel, or they may have used acrylic stones, a type of plastic, as a lower-cost alternative. If your jewelry has chains, jump rings, or other adornments, each of these components also has to be selected and manufactured.

The materials used in your jewelry matter. A reputable supplier should be able to tell you what materials are being used and, when appropriate, provide documentation supporting those material claims.

Manufacturing

Your piece of jewelry is then created using many different processes. It might be precision machined with equipment designed to maintain very tight tolerances and carefully controlled measurements (check out this measuring chart to learn what jewelry size you have), or it might be made using less precise equipment that can result in greater variation between individual pieces.

For example, a batch of balls for your barbell made on a precision CNC machine can be manufactured to consistent specifications, including thread patterns and the depth and placement of holes. A batch made using less precise processes may have greater variation from one piece to another.

These differences may not always be obvious when you look at a piece of jewelry on a display or in a photograph, but they can matter when it comes to fit, consistency, finish, and overall quality.

Finishing

Your piece of jewelry is then finished. Depending on the material and design, this can involve processes such as tumbling, polishing, deburring, and other surface-finishing techniques.

The quality of the finishing process can have a significant impact on the final surface of your jewelry. The equipment, materials, techniques, and amount of processing used can all affect the result.

A smooth, well-finished surface doesn't happen by accident. Producing consistent finishes requires appropriate processes, equipment, time, and quality control, and those choices all have costs.

Quality Control

Your piece of jewelry is then quality controlled. Who looks at it, how carefully they inspect it, and what standards they use to evaluate it can all affect the quality of the jewelry you receive.

If a piece has sharp edges, rough spots, nicks, indentations, poorly finished areas, or gems that are improperly set or coming loose, it may indicate that the quality-control process was insufficient or that the piece did not meet the manufacturer's standards.

Quality control isn't just about making jewelry look good. It is about making sure the finished product meets the specifications and quality standards it is supposed to meet.

Sterilization

If your piece of jewelry is going to be used for an initial piercing, it should be sterile before it is inserted into the piercing.

Depending on the studio's procedures (learn more Autoclaves vs Presterilized) , jewelry may be sterilized by the manufacturer or sterilized at the piercing studio before use. Professional piercing studios use sterilization equipment and procedures designed for this purpose.

Steam sterilization, commonly performed using an autoclave, uses pressurized steam at specific temperatures and exposure times to destroy microorganisms, including bacterial spores. Sterilization is different from cleaning: jewelry should be appropriately cleaned before sterilization so that the sterilization process can work effectively.

Whoever is going to pierce you should understand their sterilization procedures and how the jewelry is prepared before it is used.

Distribution

Your piece of jewelry is shipped to your purchase point. Depending on the supplier, the jewelry may arrive pre-sterilized, or it may be supplied unsterilized for sterilization at the studio before use.

Jewelry intended for healed piercings may also be supplied unsterilized. How that jewelry is packaged, displayed, and handled can vary depending on the supplier and retailer.

If you are purchasing jewelry for a fresh piercing, it should be appropriately sterilized before insertion. For healed piercings, follow the cleaning and care recommendations appropriate for the jewelry and your piercing.

Piercing Studio or Retail Shop

Your piece of jewelry is finally put on display or made available for you to choose and purchase.

But by the time you see it on the sales floor, that piece has already gone through a much longer journey than you might realize.

From the raw materials that were selected, to the equipment used to manufacture it, to the finishing and quality-control processes, every step can affect the final product.

And this is why knowing where your body jewelry comes from matters.

A reputable body jewelry supplier should be able to answer questions about the materials they use, how their jewelry is manufactured, what quality-control processes are in place, and what documentation is available to support their claims.

And Then It’s Your Turn

And then, it is your turn, as the client, to select the jewelry that seems right for you—and to take care of it appropriately thereafter.

If you're purchasing jewelry for a fresh piercing, make sure it is appropriately sterilized before insertion. For healed piercings, follow appropriate cleaning and care recommendations for your jewelry and piercing.

Happy shopping!

Frequently Asked Questions

Where does body jewelry come from?

Body jewelry passes through several stages before it reaches the person wearing it, including material selection, manufacturing, finishing, quality control, distribution, and, when appropriate, sterilization before use in a fresh piercing.

How is body jewelry made?

Body jewelry can be manufactured through processes such as precision machining, forming, drilling, threading, polishing, and other finishing processes, depending on the material and design.

How do I know if body jewelry is high quality?

Look for appropriate materials, consistent manufacturing, smooth and well-finished surfaces, quality-control processes, appropriate documentation, and a supplier that can answer questions about its products and materials.

What should I ask a body jewelry supplier?

Ask what materials they use, what specifications those materials meet, who manufactures the jewelry, what quality-control processes are used, and whether material documentation is available.

Does body jewelry need to be sterilized?

Jewelry used for an initial piercing should be sterile before it is inserted. Depending on the studio's procedures, it may be sterilized by the manufacturer or at the piercing studio before use.